Additional information
| Weight | 0.1 kg |
|---|---|
| Dimensions | 1 × 1 × 1 cm |
Shotgun Fruiting Chamber
R449.00
45l Tote with holes drilled in sides for fresh air exchange. This tote is used for fruiting PF Tek Kits and is best used with a layer of perlite to hold in moisture and keep the humidity levels high. With a few little tweeks (by adding a spray or two of water and a fan of air) you can create the perfect environment to grow your mushrooms without any fancy fans or humidifiers.
Includes 2.5lt of perlite
Related Products
Polypropylene Tubing
Polypropylene Tubing
Used to grow oyster mushrooms, sold in 60cm x 25cm (flat) sections heat sealed on one side.
Please note this will not withstand a pressure cooker, it can be used to pasteurize up to 100c.
Digital Hyrgo & Thermometer
Great for monitoring humidity and temperature in your monotub, shotgun chamber and incubator.
Heating Pad
Available in 5 sizes to provide an ideal heat source for your cultivation area, allowing growth at the required temperature. Can be used in conjunction with a temperature controller to give an even more accurate heat.
The 150mm x 212mm pad is ideal for increasing the temperature of our 13lt Monotub by around 5 degrees.
- 50mm x 490mm 9W Heating Strip
- 135mm x 160mm 9W Heating Pad
- 150mm x 212mm 9W Heating Pad
- 212mm x 370mm 20W Heating Pad
- 355mm x 360mm 20W Heating Pad
Please note, you will need to connect a plug to this product in order to hook it up to a power source.
Temperature Controller
Perfect to control the heat in your monotub or incubator.
Makes sure your heat source is at the optimal temperature all the time. Easy to put together (you will need a plug) and setup to accurately control the temp you require. It also remembers all your settings when the power goes off for load shedding, so there is no need to reset the device.
Power Supply: AC 220V
Temperature Control Range: -50°~110°
Temperature Control Precision: ±0.1°
Input measurement: NTC10K waterproof probe L = 1 meter
“Up Button” :Press once to display the start temperature,Long press set start temperature
“Down Button”:Press once to display the stop temperature,Long press set stop temperature
Fruiting Bag & Structure
An affordable and practical way to fruit your Tek Ket or Fruiting block. Simply use the structure to open the bag and place it over your kit. These bags have holes to allow sufficient airflow.
Bag: 380x500mm, 40 micron
Structure: 200x750mm flexible plastic fencing
Optional Extra Heating Cable: When weaved through the structure and connected to electricity this will increase your temp from 5-7 degrees. Plug not included.
Heating Cable
30 watt 3.7 meter heating cable, ideal to weave through the structure that’s used to keep your heating bag erect. Increase your temp by 5-7 degrees
Please note, you will need to connect a plug to this product in order to hook it up to a power source.
Sale!
not rated
R19.85 – R21.96
Select options
This product has multiple variants. The options may be chosen on the product page
Unicorn Grow Bags
MyShrooms is proud to announce that we are now the African dealer for Unicorn bags. Unicorn bags are leaders in the industry, their bags allow you to easily cultivate quality mushrooms at a greater volume. Their mission is simple – supply bags to the mushroom industry at the lowest price while maintaining the highest quality. Their side-gusseted breathable bag gives a sturdy stand-up bag after filling and a strong bottom seal. They manufacture it with equipment designed and with proprietary additives, Unicorn Bags are pliable at any temperature as well as after sterilization. The bag opening is designed for easy sealing and the bag’s bottom seal can withstand agitation.
CLICK HERE to check out what their customers have to say.
Bag Type: 14A
127mm x 203mm x 483mm
2.3kg – 3.2kg
0.5 micron
A Filter
Great bag for grain spawn & fruiting. Our Type A filter is designed for shiitake cultivation. It has a nominal 0.5 micron pore size meaning 80% at 0.5 micron and some over and some under. It is also made to have only 50% approximately area for breathing. This allows shiitake mycelium to grow in higher CO2 environment.
Bag Type: 3T
127mm x 203mm x 483mm
2.3kg – 3.2kg
0.2 micron
T Filter
Our T filter has 0.2 micron pores and 90% efficient and is designed for spawn producing.
13 lt Monotub
This 13 litre mini monotub is used to spawn grain spawn into bulk substrate. It comes with the correct sized holes drilled and fulled with poly-fil for fresh air exchange.
It is the perfect size to spawn one of our grain kits with your bulk recipe at a ration of 1 part grain spawn (800ml) to 3 parts bulk substrate (2.4l)
A common bulk substrate recipe is 2 parts coco choir : 1 part vermiculite : 1 part horse manure , this needs to be sterilized at between 65C – 75C for 90 minutes and let cool to room temperature before being mixed with your grain spawn.
Optional Extra: add a heating pad to increase the temperature of the substrate in your monotub by about 5 degrees. Plug not included.
Reviews
There are no reviews yet.